JRVP fills Paintball HPA tanks up to 4500psi!!!
EVERY FILL!!
with the investment of a Nitro Duck Booster Pump on the field.
We have chosen Nitro Duck HPA products because of
their commitment to safety, quality record
and customer service and customer satisfaction ratings.
If we have to send a product back for repair or service, they have a 24-48 hour turnaround
time policy.
They can do that because, not many come back for repair.
JRVP recognizes outdoor paintball as an extreme
sport and will not risk the safety of staff or guests
when it comes to filling CO2 tanks or HPA tanks.
If your CO2 tanks have a deep scratch or a gouge or
a sticker that could be covering a scratch or a gouge,
JRVP reserves the right to refuse to fill the tank. Check your hydro date on your tanks.
It just isn't worth the risk or danger.
Buy a new tank for $25 and play safely.
Tired of getting paintball equipment that has a 1 year warranty or less.
Tired of worrying about your fragile clear coat on your HPA tank getting scratched and lowering the value of the tank or worse
yet, cracking the fiberglass coating and exposing the strands of fiberglass exposed and ruining your HPA tank.
Nobody will fill your HPA tank with exposed fibers, it
is dangerous to you and the person pressurizing your tank.
Repairing a pressurized fiber glass vessel most likely is out of
the question and if it were possible, extremely expensive.
DOT may require re-certification of tank before
tank can be used again safely.
Checkout the Nitro Duck Tuff Skin HPA tanks.
Since their introduction some years ago,
only 3 have ever came back for repair.
Nitro Duck HPA tanks are hand made and start with a 2 year no questions asked warranty on the
regulator and 3 years on the tuff skin tank.
Tuff Skin tanks have a 5 year hydro date and have set the standard to which the
others are trying to match.
Nitro Duck tanks have the highest air flow of
ANY HPA REGULATOR on the market.
All Nitro Duck HPA tanks sold by JRVP come with
3 free air fills - (1st 3 are on me)
and our guarantee to provide a spare if needed,
on the spot.
JRVP has 2 "PTI certified" air technicians trained and certified to work with
your marker and air equipment to keep your warranty valid with their certification training required by manufacturers.
The Tech's certification training also provides them direct access to the manufacturers' technicians
for any or all technical issues if they can't fix it.
They are qualified to provide un-biased maintenance
recommendations and equipment enhancement suggestions.
Not just from their industry standard training, but also because
of their hands on working knowledge. Combine all that with
customer service the way you would want to be treated and
you have an unbeatable combination.
HPA Facts
HPA (nitrogen) is cleaner and drier which means less need for maintenance.
HPA is consistent, shot per shot, the psi delivered will not vary like CO2. The gas is
regulated by the HPA tank, (nitro duck is double regulated and adjustable for low
pressure systems) and your marker may have it's own regulator. Combine that with Nitro duck's airflow
system, you will never starve your marker.
HPA works in any temperature, CO2 is most efficient at 80 degrees.
How many shots per fill can I expect?
Gas efficiency depends on your barrel and marker.
Assuming you can fill to the max psi every fill without loss of pressure
The HPA rule of thumb is:
10 shots per ci at 3000 psi.
A 47cu 3000psi tank = approx 470 shots per fill
A 68cu 3000psi tank = approx 680 shots per fill
A 88cu 3000psi tank = approx 880 shots per fill
-------------------------------------------------------------
15 shots per ci at 4500 psi.
A 47cu 4500psi tank = approx 705 shots per fill
A 68cu 4500psi tank = approx 1020 shots per fill
A 88cu 4500psi tank = approx 1320 shots per fill
